How-To

How to Prevent Saw Blade Jamming and Extend Cutting Equipment Life

A jammed saw blade is both a safety hazard and a fast way to dull expensive tooling. Jamming can be caused by resin buildup, inadequate lubrication, and corrosion on blade bodies and guide rails.

How Kroil Addresses Causes of Blade Failure

Kroil Original Penetrant’s thin, creeping formula dissolves resin and pitch deposits that accumulate from wood, composites, and other materials. Applied to blade teeth and guide rails, Kroil reduces friction to keep cuts smooth and clean. It also protects metal surfaces from the moisture that leads to rust and corrosion, particularly in outdoor or high-humidity environments.

The same principles apply to honing equipment and lathe machinery. Whenever metal-cutting or shaping equipment shows signs of increased resistance, vibration, or surface quality degradation, Kroil Original Penetrant is an effective first step before more involved maintenance.

How to Treat Saw Blades and Cutting Equipment with Kroil

Power down and unplug the saw or cutting equipment completely before applying any product.
Apply Kroil Original Penetrant to the blade teeth, blade body, and guide rails or channels.
Allow 10–15 minutes for the formula to dissolve resin buildup and penetrate any corrosion.
Wipe away loosened debris and excess penetrant with a clean shop rag.
Return to operation and monitor for smooth, consistent cutting performance.

For blades in regular use, a light application of Kroil after each extended cutting session keeps buildup from accumulating and significantly extends the service life of the blade. For equipment that sits between jobs, treat before storage to prevent corrosion during downtime.